manualshive.com logo in svg

Fayat Group BOMAG BRP 35/60 D, Инструкция по эксплуатации, Инструкция по обслуживанию

Поделиться
Скачать
Fayat Group BOMAG BRP 35/60 D Скачать руководство пользователя страница 53

4.

CAUTION!
Danger of injury caused by the crushing

of body parts!

–

When reversing, steer the machine from

the side using the steering handle.

Pull the handle back.

ð

The machines vibrates backwards with a speed which

corresponds with the handle position.

5.

Move the handle back to position “0”.

ð

The machine stops and vibrates on the spot.

6.

For short work interruptions you should always return the

throttle lever to “MIN” position (idle speed).

ð

Vibration is switched off.

7.

For short work interruptions you should always park the

machine in secured condition

 

Ä

 Chapter 6.4 ‘Parking the

machine in secured condition’ on page 55

.

1.

Keep shifting the throttle lever between “MIN” and “MAX”

positions.

At the same time use the steering rod to pull the machine

right and left, until it comes free.

B-695-0006

Fig.  34

B-695-0004

Fig.  35

B-692-0023

Fig.  36

Help if the machine gets stuck

B-692-0026

Fig.  37

Operation – Operation

 

BPR 35/60 D

 

54

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Содержание BOMAG BRP 35/60 D
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды