manualshive.com logo in svg

Fayat Group BOMAG BP 20/50, Руководство по эксплуатации

Поделиться
Скачать
Fayat Group BOMAG BP 20/50 Скачать руководство пользователя страница 37

 Maintenance every day

BOMAG

40

BP 20/50, BP 25/50

5.8

Check the fuel level

!

Danger

Fire hazard!

When working on the fuel system do not use 
open fire, do not smoke, do not spill any fuel.

Do not refuel in closed rooms.

Shut down the engine.

!

Danger

Health hazard!

Do not inhale any fuel fumes.

!

Caution

Contaminated fuel can cause malfunction or 
even damage of the engine.

For quality and quantity of oil refer to the "table 
of fuels and lubricants".

Environment

Catch running out fuel, do not let it seep into 
the ground.

Fig. 42 

l

Clean the area around the filler cover, unscrew 
the filler cover (Fig. 42).

l

Fill in fuel through a funnel with screen.

l

Close the tank again.

5.9

Filling the water tank

*

 

!

Caution

Dirty or contaminated water can block the noz-
zles!

Fill only with clean water.

Fig. 43 

l

Open the water tank cover (1) (Fig. 43) and fill 
in clean water.

i

Note

The water tank can alternatively also be removed 
for filling.

l

Disconnect the hose (4) from the sprinkling 
tube.

l

Pull out the cotter pin (2).

l

Pull the bolt (3) and take off the water tank.

l

Insert the bolt through the guides on the water 
tank and insert the cotter pin to lock.

The water tank can now be carried by the bolt.

 

*

Optional equipment

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Содержание BOMAG BP 20/50























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды