523 331
PUBLICATION DATE Jan 06
USER´S MANUAL
7
4.8. END OF WASH CYCLE
You can see clearly the end of the washing cycle on the operator panel when the light next to the door
symbol lights up and the time display indicates “0”. Open the door with the door handle and take out the
fabrics of the washer extractor.
WARNING !
IF YOU CAN’T OPEN THE DOOR, FOR EXAMPLE BY A POWER FAILURE, WAIT A CERTAIN TIME
UNTIL THE SECURITY SWITCH IS COOLED DOWN. THIS IS A SAFETY! THE DOOR CAN BE OPENED
AFTER A COUPLE OF MINUTES. MAKE SURE THAT THE DRUM HAS COMPLETELY STOPPED
AND DRAINED BEFORE OPENING THE DOOR.
When a power failure occurs for a short time, the wash program will continue when the power comes back
on. When the failure occurs for a longer time and the door is still closed the display and the light next to the
start button starts flashing when power is restored. If the door is still locked the timer will continue the program.
Press the start button to continue the program. If the door was opened, the program will be cancelled.
4.9. HOW TO OPEN THE DOOR BY FAILURE
WARNING !
THIS HANDLING SHOULD ONLY BE DONE BY QUALIFIED TECHNICIANS! MAKE SURE THAT THE
DRUM HAS COMPLETELY STOPPED AND DRAINED BEFORE OPENING THE DOOR! OPENING THE
DOOR WHILE THERE IS STILL HOT WATER IN THE DRUM CAN CAUSE SERIOUS BURNS! MAKE
SURE THAT THE REMAINING WATER IS COMPLETELY COOLED DOWN BEFORE YOU OPEN THE DOOR!
Should the door fail to open such as the case with a failure, the door can be opened as follows :
1. Remove the lower service panel located on the front of the washer.
2. Behind the panel on the left hand side, there will be a string. Pull this string down, then open the door.
3. Reinstall the service panel.
!
!
