6
USER´S MANUAL
PUBLICATION DATE Jan 06
523 331
4. OPERATION INSTRUCTIONS
4.1. BEFORE WASHING
Sort the linen according on the temperature and the instructions of the manufacturer of the fabrics. Check
if there aren‘t any strange objects between the linen like nails, screws, needles, etc. in order not to damage
the washer-extractor or the linen. Turn sleeves of shirts, blouses, etc. inside out. To get a better washing
result, you have to unfold the fabrics and mix the bigger and smaller pieces of fabrics.
4.2. OPEN THE DOOR
Open the door by pulling on the door handle.
4.3. LOADING THE WASHER
Put the linen in the drum depending on the maximum capacity of the washer. Do not overload the washer extractor.
Overloading the machine can lead to a bad wash result. Half washing loads can obstruct a proper function.
4.4. CLOSE THE DOOR
Close the door with the door handle, making sure the door is properly latched before operating the washer.
4.5. PROGRAM SELECTIONS
Choose one of the available wash programs, best corresponding to the quality of the garments and allowed
wash temperature in the wash load. The different washing programs are indicated on the operator panel.
The selection of the program determines the temperature and the time for washing and rinsing. If you wish,
you can adapt the wash programs. (See programming manual)
4.6. ADD DETERGENTS
R
Washer extractors with top soap dispenser.
Fill the soap dispenser on the top of the washer extractor depending of the chosen program.
Dispenser
A
:
Prewash
(add the detergent at the beginning of the wash cycle)
Dispenser
B
:
Wash
(add powder detergent or bleach detergent at the beginning
of the cycle, you may add liquid detergent or liquid bleach during the wash cycle.
If added at the start of the cycle, it will run in the washer prematurely)
Dispenser
C
:
Final Rinse (Add fabric softener at the beginning of the cycle or before
the final rinse)
R
Standard wash programs versus custom made wash programs.
This explanation is only valid for standard wash programs. For custom made programs, it’s possible that
other dispensers have been selected. (See programming manual)
R
Remark
:
- It is advisable to use only detergents with “foam breaker” which can easily be found in retail shops.
The dosage of soap to use is generally mentioned on the packing. An overdose of detergent
can lead to poor wash results and “suds" overflow which can damage the machine.
- Take care that the lid of the soap dispenser is closed if the machine starts.
4.7. START THE WASHER
Push the START button to start the washer extractor. When you have selected a wrong washing program,
you can change it during the first washing step by pushing the other washing program. During the washing
cycle you can follow the actual washing sequence, the remaining time and temperature on the display,
as far as this display was preset. If the advance function was preset, you can go on to the next step by pushing
the START button.
101008
