FAVI RioHD-LED-2, Руководство пользователя

Страница: 6 / 10

13 4
A/V
S-V ideo
Y /PB /PR
V GA
HDM I
Selecting a video mode
Your projector is set to A/V mode by default. To use your projector in another video mode, you must set it to that mode.
If for example you want to use your projector in VGA mode, you will need to set it to that mode. To change video
modes, press the “Source” button on your remote to bring up the following menu in the upper right corner of your screen:
Here you can set your projector to the video mode you want to use. Use the arrow buttons on your remote
control to highlight the mode you wish to select, then press the “OK” button on your remote to switch over to the
mode you highlighted.
Powering on/off your projector
After plugging your projector in, press the power button on either the remote control, or the projector. To turn
the projector off, press the power button again.
Problem: Solution:
Troubleshooting Getting started (continued)
If you have any issues setting up or using your RioHD-LED-2, before contacting us please refer to the
following troubleshooting guide:
Projector will not power on.
Make sure that the power supply is plugged in
correctly. The power supply has a built in
indicator LED which should glow when plugged
in.
I have a video source connected, but the projector
shows the “NO SYNC” screen.
Check your video source, and video connections.
Check to make sure your projector is set to the
correct video mode.
I can’t get the projector to change from one
video mode to another.
The MENU button in the middle of the navigation
arrow buttons on your remote does not select
video modes. After highlighting the video mode
you want to select, press the “OK” button.
I connected my projector to my stereo with an
adapter cable, and the sound is distorted.
Try setting the projector’s volume to 50% or lower,
and use your stereo’s volume control to adjust the
volume.