15
3. Guidelines for pairing via ANT+ and Bluetooth
Your training device must be turned on.
1. Manually rotate the crank-arms to activate the pedals
2. Open the “Settings” section on your training device
3. Select “Sensors” and “Add new sensor”
4. A list of the available devices will appear
5. Select the left sensor to proceed with the pairing.
14. Crank-arm length
The crank-arm length has an influence on power
calculation.
Assioma PRO MX must, therefore, know its value: an
incorrect vaule may result in incorrect power data.
Please, refer to the manual of your bike computer’s
manufacturer to understand how to correctly set the
crank-arm length value.
Should it not be possible to set the crank-arm length on
your bike comuter/third-party app, insert it directly on the
Favero Assioma app.
Do not set the crank-arm length on the Favero Assioma
app but on your bike computer if the latter offers this
feature, otherwise the value inserted on the Favero
Assioma app would be overwritten.
15. Manual and automatic calibration
Each Assioma PRO MX sensor is factory calibrated to
ensure its guaranteed precision under any operating
conditions, including ambient temperature variations,
for which automatic compensation from -10°C to +55°C is
active.
Assioma PRO MX features the automatic calibration
functionality
(or zero-offset), a sophisticated algorithm
taking into account different aspects over time and
performing several periodic calibrations of the product.
Store the bike upright (not tilted), with no load applied
on the pedals.
Automatic calibration is independent of the crank
position.
Manual calibration is only required at first installation
and any time you swap Assioma PRO MX between
bikes.
It is, however, possible to keep on performing manual
calibration on the Favero Assioma app or compatible bike
computers following the procedure described below.
