Faurus Stomp-Head 5, Руководство пользователя

Страница: 5 / 8

− 4 −
The graph below shows how the external foot−switch should be connected in order to
control amplifier functionalities. If the external foot switch is connected, therefor, the
internal amp foot−switches become disconnected.
Note: external controller should
be implemented with momentary or bistable switches type 0FF− [ON].
EXTERNAL FOOT SWITCH CONNECTION
CHANNEL 2 − RING BOOST − RING
CHANNEL 1 − TIP CHANNEL 3 − TIP
Stereo jack Stereo jack
Ground Ground
External controller
External controller wire connection
Made in Poland
Fuse: 2.5A
NUMBER:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCTS
TO RAIN OR MOISTURE
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL
CAUTION!
SEND
EFF
LOOP
(PA-INPUT)
Two mode output:
NORMAL
SPEAKER SIMULATION
SELECTABLE POWER OUTPUT:
90W/40W [RMS]
POWER RETURN
4−8−16
ohm
GAIN
EXT. CTRL.
MIX MODE NORMAL
Ch−1
Ch−2
Ch−3
BOOST
LINE OUT
200W/rms power stage
INSIDE
OFF/ON
230V/50Hz
CHANNEL1−2 contr
ol
CHANNEL−3 and BOOST contr
ol
BOOST
CH−3
CH−2
CH−1
Momentary switches
type OFF-(ON)
pulse triggering
or
bistable switches
type OFF-(ON)