FAURE FRA25600WA, Руководство пользователя

Страница: 12 / 16

1
2
3
9. Unscrew the screws of
the door top hinge.
10. Remove the hinge.
Put over the pin in the di-
rection of the arrow. Install
the hinge on the opposite
side. 11. Tighten the hinge.
1
2
3
12. Put the top in position.
13. Push front the top.
14. Screw both screws on
the rear side.
15. Remove and install
the handle
1)
on the oppo-
site side.
16. Reposition, level the
appliance, wait for at least
four hours and then con-
nect it to the power sock-
et.
1) If foreseen
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
In case you do not want to carry out the above men-
tioned operations, contact the nearest After Sales Serv-
ice Force. The After Sales Service specialist will carry
out the reversibility of the doors at your cost.
Electrical connection
Your appliance must be connected to a single-phase
supply of 230 V. Check that the electricity meter is suit-
able for the power consumed by your appliance, allow-
ing for the other connected appliances. Rating of the in-
line fuses (one per phase): 10 A at 230 V.
Important! Installation must be done in conformance
with the applicable codes, the requirements of the
standard NF.C.15100 and the requirements of the
electrical energy supplier.
Use a power supply socket that has an earth connec-
tion and this must be connected in conformance with
the standard 15100 and the requirements of the suppli-
er of electrical energy. this power supply socket must
be accessible. If the mains supply cable is damaged, it
must be replaced by a certified supply cable. This must
be done only by a skilled person, the seller or the man-
ufacturer. The appliance must not be connected via an
extension cable, a multiple socket or a multiple connec-
tor (risk of fire). Make sure the earthing connection
complies with the regulations in force.
We will accept no responsibility in the event of acci-
dents or incidents caused by non-existent or defective
electrical earthing connections.
Environmental concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product,
please contact your local council, your household waste
disposal service or the shop where you purchased the
product.
12