FAURE HERMAN Ultraflux Minisonic, Инструкция по эксплуатации

Страница: 13 / 21

Display of the probe spacing distance
Measurement config. / Probe distance
Probe distance
Pair of probe 1 - A
54.4 mm
Pair of probe 1 - B
48.6 mm
Menu
Measurement config.
Probe distance
US Signal display
Auto Zero
Menu
Measurement config.
Probe distance
US Signal display
Auto Zero
Probe distance
Displays the distance between the sensors.
This distance is calculated by the device according to the configured
parameters:
• Diameter / thickness / pipe material
• Type of fluid
• Type of probes
The example on the right shows the distance to apply between the
probes of the Pipe A and Pipe B
Visualisation of measurement echoes
Measurement config. / US signal display
79.7 µ s
13 dB
13dB AB
0.5 ns
13dB BA
0.5 ns
13dB ABBA
79.3 ns
Allows the viewing window to be moved for signal assessment
Allows the display to be centred on the measuring point.
Large view
Wide visualisation of the quality of the measurement signal according
to the programmed parameters and measurement conditions
Echo from A to B
Visualisation of the ultrasonic echo emitted from probe A and
received on probe B
Echo from B to A
Visualisation of the ultrasonic echo emitted from probe B and
received on probe A
Phase shift AB-BA
Visualisation of the 2 echoes and the difference in transit time of the
ultrasonic wave between the AB and BA paths
25 24
Settings level
Simple
Normal
Advanced
Simple
Normal
Advanced
The Minisonic has been designed to adapt to your level of knowledge of ultrasonic measurement.
The menus detailed in this manual correspond to the Normal mode of the setting level menu.
Settings level
Simple
Contains the minimum parameters necessary to do flow measurement
with the minimum of parameters to be set
Normal
Gives access to more features and settings to refine the measurement
Advanced
Contains all the parameters available in the unit.
Simple
Normal
Advanced
Reset config.
Deletes the data in the current configuration and returns to the
default configuration.
A warning message will pop-up on the screen to ask for reset
confirmation
Save config.
Saves the current configuration
Ask a name for this configuration so that you can use it again latter
Load config.
Uploads the parameter data of a saved configuration
Delete config. Deletes selected or all configuration files
Configuration management
Menu
Measurement config.
Probe distance
US Signal display
Auto zero
Measurement config.
Measurement settings
Logger
Inputs / Outputs
Settings level
Settings level
Menu
Measurement config.
Probe distance
US Signal display
Auto zero
Measurement config.
Logger
Inputs / Outputs
Settings level
Config. Management
Config. Management
Config Management
Reset config.
Save config.
Load config.
Delete config.
Config Management
Reset config.
Save config.
Load config.
Delete config.
Config Management
Reset config.
Save config.
Load config.
Delete config.
Config Management
Reset config.
Save config.
Load config.
Delete config.
Settings level
Settings level
Menu
Measurement config.
Probe distance
US signal display
Auto Zero
Menu
Measurement config.
Probe distance
US signal display
Auto Zero
(....)