FAURE HERMAN FH8400, Руководство пользователя

Страница: 42 / 111

F H 8 4 0 0
40
40 40
40 TEC 07.07.04/ 412521
Revision index F
08/07/2013
"2 Reset Totalizer" : Reset of the totalizer
"3 Corrected diameter" : Value of the inside diameter (in mm,
with a 1
µ
m resolution) according to the temperature
"4 Serial Number" : Display of the FH8400 serial number
"5 Configuration" : Setting of the measurement parameters
(parameters modifiable only in non custody transfer mode after a
meter stop)
• "50 Calibration" : Definition of the damping (filter time
constant) and display of the factory set parameters
•
"51 Set Pulse Output" : Definition of the K-factor unit
"6 Zeroing": Adjustment of the zero, normally achieved in
factory and accessible only in non custody transfer mode after a
meter stop
Selection of units
Display unit for
the flow rate
"100 Flowrate" menu
Possible units: m
3
/h ; m
3
/mn ; m
3
/s ; l/h ; l/mn ; l/s ;
gpm (gallon per minute) ; bph (blue barrel per hour)
Display unit
for the temperature
"101 Temperature" menu
Possible units: °C ; °F ; K
Display unit
for the pressure
"102 Pressure" menu
Possible units: bar; kPa ; psi
Display unit
for the totalizer
"103 Totalizer" menu