manualshive.com logo in svg

Faulhaber MC 3001 B, Техническое руководство, Страница: 9 / 84

Поделиться
Скачать
Faulhaber MC 3001 B Скачать руководство пользователя страница 9

1st edition, 12.02.2021

7000.05071, 1st edition, 12.02.2021

7000.05071

Safety

9

2.2

Safety instructions

NOTICE!

Electrostatic discharges can damage the electronics.

Wear conductive work clothes.

Wear an earthed wristband.

NOTICE!

Foreign bodies can damage the electronics.

Keep foreign objects away from the electronics.

NOTICE!

Inserting and withdrawing connectors whilst supply voltage is applied at the device can 
damage the electronics.

Do not insert or withdraw connectors whilst supply voltage is applied at the device.

2.3

Environmental conditions

Select the installation location so that clean dry air is available for cooling the Motion 
Controller.

Select the installation location so that the air has unobstructed access to flow around 
the drive.

When installed within housings and cabinets take particular care to ensure adequate 
cooling of the Motion Controller.

Select a power supply that is within the defined tolerance range.

Protect the Motion Controller against heavy deposits of dust, in particular metal dust 
and chemical pollutants.

Protect the Motion Controller against humidity and wet.

Содержание MC 3001 B





















































































Отзывы:

Нет отзывов