4th edition, 26-08-2020
7000.05058, 4th edition, 26-08-2020
7000.05058
Safety
8
2
Safety
2.1
Intended use
The Motion Control Systems described here consist of a combination of a base motor and
an integrated Motion Controller within a common housing with standard protection class
IP 54.
The Motion Control Systems are intended for use as slaves, and are particularly suitable for
positioning tasks in the following application fields:
Robotics
Toolbuilding
Automation technology
Industrial equipment and special machine building
Medical technology
Laboratory technology
When using the Motion Control Systems the following aspects should be observed:
Motion Control Systems contain electronic components and should be handled in
accordance with the ESD regulations.
Do
not
use the Motion Control Systems in environments where it will come into contact
with chemicals,
nor
in explosion hazard areas.
The Motion Control Systems should be operated only within the limits specified in the
corresponding data sheet.
Please ask the manufacturer for information about use under individual special
environmental conditions.
2.2
Safety instructions
NOTICE!
Electrostatic discharges can damage the electronics.
Wear conductive work clothes.
Wear an earthed wristband.
NOTICE!
Penetration of foreign objects can damage the electronics.
Do not open the housing.
NOTICE!
Inserting and withdrawing connectors whilst supply voltage is applied at the device can
damage the electronics.
Do not insert or withdraw connectors whilst supply voltage is applied at the device.
