4th edition, 26-08-2020
7000.05058, 4th edition, 26-08-2020
7000.05058
Installation
26
Fig. 14: Digital output circuit diagram (internal)
The digital output has the following properties:
Open collector switch to ground
Monitored output current (switch opens in the event of an error)
The digital output can be configured for the following purposes:
Fault output
Actuation of an externally installed brake
Digital output (freely programmable)
4.2.5
External circuit diagrams
Bipolar analogue set-point specification via potentiometer
Fig. 15: Bipolar analogue set-point specification via potentiometer
DigOut
33k
U
P
DigOut
–
+
20 V
AnIn
AGND
U
P
GND
GND
U
P
10 V
1x10
3
4,7x10
3
1x10
4
Motion Control System
Interface
Ref
