Faton FA950V, Руководство пользователя

Страница: 97 / 98

97
CERTIFICATE
Certificat - Certificado- Сертификат - Zertifikat -
證書
1) APPLICANT:
(who finally puts the product on the market)
Cixi Beilian electrical appliance co., LTD
No.28th,HaitongRoad,GuanhaiweiTown,Cixi,Ningbo,P.R.China
2)
CERTIFICATE NO.:
ISETC.001020191231
FILE REFERENCE: DL-2019124435S, DL-2019124360E
3)
ISET MARK:
4)
CAUTION ABOUT CE MARKING
(Instruction for the Applicant who puts the product on the EU market):
The label of the CE Marking on the left side should be not less than 5mm height. CE Marking and EC Declaration
of Conformity are duties for the manufacturer or its applicant who puts the product on the market. This one is
responsible to start the CE marking and certification procedure as required by the legislation in force. Only for
the products which are compulsorily included into specific Directives or Regulations will be necessary to appoint a Notified Body.
5) TYPE OF PRODUCT: Air Purifiers
MODEL(S): BKJ-215, BK-01, BK-02, BK-03, BK-05, BK-06, BK-07, BK-08, BKJ-350, BKJ-350A,
BKJ-370, BKJ-306, BKJ-300, BKJ-250F-A01, BKJ-310F-A01, BKJ-300A, BK-02A,
BKJ-215C, BKJ-33, BKJ-306A, BKJ-306B, BKJ-70, BKJ-80A, BKJ-80B, BKJ-215B,
BKJ-50, BKJ-5, BKJ-15, BKJ-15A, BKJ-15B, BKJ-15C, BKJ-03-0725, BKJ-08-0720,
YKX-35-A01, BKJ-250D-A01, BKJ-16A, BJS-30A, BJS-30C, H411, H610, VAP55
6) LIST OF DIRECTIVES / REGULATIONS /STANDARDS (as declared by the manufacturer itself)
Low Voltage Directive 2014/35/EU, Electromagnetic Compatibility 2014/30/EU
EN 55014-1:2017, EN 61000-3-2:2019, EN 61000-3-3:2013+A1:2019, EN 55014-2:2015,
EN 60335-1:2012+A11:2014+A13:2017, EN60335-2-65:2003+A1:2008+A11:2012
7) NOTE: The applicant is aware about the contents and information included in the
ModCOM04.06
Regulation for this type
of Certificate that is considered totally accepted. The latest revision of the Regulation is available and can be downloaded
from the website www.iset-italia.eu. This document is not referred to any evaluation that could be considered as included
in the scope of the activities covered by the standard
BS EN ISO/IEC 17065:2012
or European Regulation 765/2008.
8) REMARK: Certificate is issued on voluntary application from the Client and it gives to the applicant the right to use
and affix the ISET Mark (at point 3) on their products, even if it doesn’t imply any assessment on the safety and
compliance of the product.
ISET declares that the only scope of the assessment is to verify the existence of the declaration
issued by the manufacturer or an applicant under its own responsibilities.
9) DATE OF ISSUE: 31/12/2019 EXPIRY DATE: 30/12/2024
10) SIGNATURE: Li Zhang
(On behalf of the Legal representative)
This document is property of ISET Srl and any kind of reproduction is to be considered strictly forbidden.
ISET S.r.l.
Unipersonale
Sede Legale e Uffici Cap. soc. i.v. € 10.200,00
Via Donatori di sangue, 9 - 46024 Moglia (MN) Cod. Fisc. e P.IVA Reg. Imprese 02 332 750 369
Tel. e fax +39 (0)376 598963 REA 02 332 750 369
www.iset-italia.eu iset@iset-italia.com Cap. soc. i.v. MN 0221098