fatFreezer
TM
Face
2 |
Page
Product Instructions:
1.
First start by applying your product of choice. This step only applies to the
Circulation
&
Rejuvenation
Modes as with the
Sculpting
Mode you will have to use your supplied
Protective Pad with cold temperatures.
2.
Begin by sweeping your
fatFreezer
TM
Face
down the bridge of the nose, following the
. Then, in one fluid motion, continue sweeping your
fatFreezer
TM
Face
under the eyes and
outward. Continue this motion for 2-4 minutes.
3.
Next, bring your
fatFreezer
TM
Face
over the cheekbones, and sweep outward. Repeating the same
motion for under the cheekbones. Continue this motion for 2-4 minutes
4.
Now you'll move onto the forehead. Use the same sweeping motion, working from the center
of the forehead out and using upward motions from the eyebrows to the hairline. You'll want to
continue this motion for a full 4 minutes.
5.
Next, the chin: Sweep your
fatFreezer
TM
Face
from your bottom lip down to the jawline. Move
from the center of the chin outward to the ears. After that, sweep your
fatFreezer
TM
Face
from the
center of chin out and up to the ears. Continue this motion for 4 minutes, alternating sides.
Rejuvenation (Green Light) Mode
Vibrating Massage, helps activate the skin,
refines pores and helps improve sagginess.
Sculpting (Blue Light) Mode
Cold (~19
o
C) helps promote micro-circulation
on the skin’s surface.
Circulation (Red Light) Mode
Heat (~40
o
C) can help reduce the appearance
of fine lines, wrinkles, loose skin and
moisturize the skin.