19
Move the cursor to the table locating in the center of window then click
the right mouse button then the screen appears a pop-up menu as shown
below
Click ’Add’ to add one station mapping data. Click ’Del’ to delete a station
mapping data. Click ‘Edit’ to modify an existed station mapping data. After
click the ’Add’ command the screen changes to
Following are the description of each field shown in above
Local Station
: The station number of local PLC
Remote Station
: The station number of remote PLC
Remote IP
: The IP address of Ethernet module connected by the remote
PLC.
Group Size
: With execute this dialog once can define a group of station
mapping, for example, if we want to map the local PLC station number
20~29 to remote PLC station10~19 and the IP Address of remote Ethernet
module is 192.168.1.3 then can set the Local Station to 20, Remote
Station to 10, Group Size to 10, Remote IP to 192.168.1.3. The Ethernet
www.manasanat.ir
