Fatal1ty F-I90HD, Руководство пользователя

Страница: 49 / 88

BIOS Setup
F-I90HD 2-21
- FanEQ Start Control
This item sets the speed ratio for the 3-pin CPU fan assembly connected at “CPUFAN1” fan
power connector to start running.
- FanEQ Stop Control
This item sets the lowest speed ratio for the 3-pin CPU fan assembly connected at “CPUFAN1”
fan power connector to run at when the CPU temperature detected is lower than the value of
item “FanEQ Target Temp.” plus the value of item “FanEQ Temp. Tolerance”.
In the situation when the CPU temperature detected is higher than the value of item “FanEQ
Target Temp.” plus the value of item “FanEQ Temp. Tolerance”, the speed ratio for the 3-pin
CPU fan assembly connected at “CPUFAN1” fan power connector will first run at the speed ratio
set by the item “FanEQ Start Control”, and then up to 100%.
SYS FanEQ Control
This item allows you to control the SYSFAN speed. When set to [Enabled], the following items
become configurable.
- FanEQ Target Temp.
This item sets the temperature mark for the “SYS FanEQ” function to take effect.
- FanEQ Temp. Tolerance
This item sets the temperature tolerance range for the item “FanEQ Target Temp.”.
- FanEQ Start Control
This item sets the speed ratio for the 3-pin fan assembly connected at “SYSFAN1” fan power
connector to start running.
- FanEQ Stop Control
This item sets the lowest speed ratio for the 3-pin fan assembly connected at “SYSFAN1” fan
power connector to run at when the temperature of “FanEQ Reference Temp.” detected is
lower than the value of item “FanEQ Target Temp.” plus the value of item “FanEQ Temp.
Tolerance”.
In the situation when the temperature of “FanEQ Reference Temp.” detected is higher than the
value of item “FanEQ Target Temp.” plus the value of item “FanEQ Temp. Tolerance”, the
speed ratio for the 3-pin fan assembly connected at “SYSFAN1” fan power connector will first
run at the speed ratio set by the item “FanEQ Start Control”, and then up to 100%.
Back to PC Health Status Setup Menu
FAN Fail Alarm Selectable
This item selects the fan that will be monitored for malfunction.
Shutdown When FAN Fail
When set to [Enabled], the system will be shut down if the CPU fan is not running.
CPU Shutdown Temperature
This item sets the temperature that will shutdown the system automatically in order to prevent
system overheats.