Fat Shark
5
Left section
shows scan progress upon power up (or initiate scan).
Center section
under “On Air” is the number of HDZero units found broadcasting and on which
channels. Last Channel is channel last used when powered down. Verify that your last
channel used corresponds to a low RF green bar before powering the TX.
Right section
shows the RF occupancy of all 4 HQ channels and 6 LQ channels. This may consist
of all digital and analog transmission and RF noise (including your transmitter if powered). The
green bars indicate available channels with the smaller the bar, the less noise (and the best
channel to use). Best to power and scan the RX before powering on the TX to ensure you are
flying on the cleanest channel (for best results).
5 Way Joy Switch
. The button directions correspond to the OSD Icons in the top left corner.
Press right (check icon) to proceed to displaying image on screen (may need to change channels
with the up/down channel keys to acquire your transmitter). The default channel is the
channel last used.
