Fat Shark
5
DVR Operation
1. SD card MUST be formatted before use to ensure stable recording.
2. DVR is for analog recording only, no HD recording.
3. Do not place alternative files that you want to keep into the DVR. The DVR may not
recognize the file space and write over your files. Use dedicated SD card.
Recording
:
After powering goggles, turn on DVR by depressing vertically and holding the DVR control
button for 1 full second (
long press)
.
RED LED should now show solid.
Ensure SD card is inserted and
short press
to start recording (RED LED will slowly FLASH (~2
times/second). Single beep on record start.
Short press
again stops recording (turns to solid RED LED). Double beep on record stop.
Playback
Playing back the recording files must disconnect the external receiver and remove the AV in
source (preventing OSD menu conflict)
After turning on DVR and in stop record mode (SOLD RED LED) depress and hold DVR button
for 1 second (
long press
) to enter menu.
Menu Navigation
Playback
(press right to enter)
Now can see: Preview shot with file number
press
up/down
to change file number
press
right
to play
Up/down
controls playback speed/direction
Right press
pause/play
Left press
, back to main menu
Format
(press right to enter)
Execute (press right)
Record
(press right)
Now can see:
default
(no recording until press the button to start)
auto start
(auto start recording when power on)
auto start continuous
(auto start recording when power on and overwrite the file if
space is full)
press
up/down
to select the recording mode
press
right to enter
to confirm
Pressing
left
from main menu exits menu
AV Cable Pinout
3.5mm AV Connector
: Yellow: Video,
White: Audio Left, Red: Audio Right
External video recording
Use the AV cable to insert the AV in/out connector on the right side of goggle, and connect the
external video recording device to the other end of AV cable(Please refer to the equipment
supplier's instructions for the relevant settings).
Gr ound Video AudR AuL
