Fat Shark
4
Controls Diagram
Controls
Brightness/contrast control:
Pressing left/right increases/decreases display contrast. Pressing
forward/back increases/decreases display brightness.
RX power switch
: The receiver module power is controlled by this switch. Turn off RX module to
avoid video conflict with video source via the AV cable.
Channel select
: Rocking the channel select switch forward and back will cause the channel to
incrementally increase/decrease. Audio beep sounds on channel change. A long beep sounds on
channel top and bottom limits. See OLED section for more details.
Low battery warning:
Audio warning if input voltage drops below 6.8V
Volume control:
There is no volume control - volume level is set at high. Please use with
adjustable earphone accessory for volume control
IPD adjustment
Display control
DVR control
Channel Selection /
Head Tracker Reset
Power in
AV in/out
RX on/off
Earphone jack
RF module
