manualshive.com logo in svg

Fat Cat 64-0500, Простая инструкция по сборке и правила

Поделиться
Скачать
Fat Cat 64-0500 Скачать руководство пользователя страница 2

This manual is provided to instruct you during the assembly of your new Fat Cat™ Shot King Pool Table.

Please refer to it as necessary. Be sure to have another person help you assemble the table. 

Careful handling of all parts during assembly will ensure many years of enjoyment!

Fat Cat™ Pool Tables use the patented Levelal™ table leveling system to assure your table remains level

and continues to give you the finest playing surface in the industry.

Recommended room size for the Fat Cat™ Shot King Pool Table is 13' 4" x 16' 0" minimum.

Tools

Assembly of the Fat Cat™ Shot King Pool Table requires the following common tools:

• Drill or screw gun with Philips bit

• Scissors

• A drill bit for pilot holes

• Fine grit sandpaper or emery cloth

• Regular and Philips screwdrivers

• Several clean rags

• Socket wrench kit

• 2 sheets of folded paper

• Carpenter’s level

• Disposable cup

• Tape measure

• Putty knife

• Razor knife/Box cutter

Arrange all of your tools before you begin assembly.

Unpacking

Laying out parts in advance allows you to easily follow the assembly instructions.

Carefully remove all components and separate into the following groups:

1. 

The Pedestal Group: 

2 (#21) leg panels, 2 (#22) leg post A, 2 (#23) leg post B, 2 (#25) leg center cross

braces, 4 (#26) support blocks, 4 (#27) leg protectors, 4 (#28) leg levelers, 16 (#2) Philips head screws, and 24

(#1) flat head screws. 

2. 

The Frame Group:

2 (#29) side beams, 2 (#30) center cross beams, 2 (#32) end cross beams, 8 (#4) hex

bolts, 8 (#8) hex bolts, 8 (#5) hex nuts, 8 (#7) spring washers, 24 (#6) black washers, 8 (#10) washers, 8 (#11)

spring washers and 8 (#9) hex bolts. 

3. 

The Slate and Apron Group:

3-piece (#33) slate set, 2 (#35) side aprons, 2 (#36) end aprons, 4 (#37) apron

corner pieces, 24 (#12) screws, 16 (#20) slate screws, 4 (#31) wood plugs and 32 (#13) round head screws.

4. 

The Cloth Group: 

1 piece of (#34) green cloth, 1 (#49) can of spray adhesive, and 1 (#50) bag of joint

compound. 

5. 

The Rail and Pocket Group: 

2 (#38) side rail pieces, 2 (#39) end rail pieces, 4 (#40) end rail corner pieces,

6 (#41) drop pockets, 24 (#24) pocket nails, 18 (#18)  hex bolts, 18 (#19) washers, 4 (#16) washers and 4

(#15) bolts.

★

PRO TIP

★

★

PRO TIP

★

★

WARNING! Make sure table is assembled on the spot where you plan to keep it. Do not attempt to move

table after it is assembled. Sliding the table may cause it to collapse!

★

2

Содержание 64-0500













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды