CPC514
C P C 5 1 4 U s e r M a n u a l
32
© 2 0 2 0 F a s t w e l V e r . 0 0 2
3 Installation
In order install the CPC514/CPC514RC properly and safely, you should strictly follow the below
rules, warnings, and procedures.
3.1 Safety requirements
While handling the CPC514/CPC514RC module, you should observe the following safety
requirements. The manufacturer is not responsible for any damage resulting from non-compliance
with these requirements.
Caution!
Be careful when handling the module, as the cooling heatsink may get very
hot. Do not touch the hot heatsink. Use gloves to protect your hands against
burns or wait for the module to cool down.
The module should not be placed in any container until the heatsink has
cooled down to the room temperature.
Attention!
Turn off the system power before installing the module in an empty slot.
Violation of this rule may pose a threat to your health and life, as well lead to
the damages to the system or module.
If you need to place the module on the table, make sure that the module is
facing down.
Static-sensitive device!
The module contains elements that are sensitive to electrostatic discharges. In
order to avoid damage to the module, you should observe the following
precautions:
Before touching the module, remove the static charge from the clothes,
and remove the charge from the tools before using them.
Do not touch electronic components or connector contacts.
If you have a professional workplace with anti-static protection, do not miss
the opportunity to use it.