Installation
CPC1600
C P C 1 6 0 0 U s e r M a n u a l
42
© 2 0 0 8 F a s t w e l V e r . 0 0 1 E
3
Installation
The CPC1600 is easy to install. However, it is necessary to follow the procedures and safety
regulations below to install the module correctly without damage to the hardware, or harm to
personnel.
The installation of the peripheral drivers is described in the accompanying information files. For
details on installation of an operating system, please refer to the relevant software documentation.
3.1
Safety Regulations
The following safety regulations must be observed when installing or operating the CPC1600.
Fastwel assumes no responsibility for any damage resulting from infringement of these rules.
Warning!
When handling or operating the module, special attention should be
paid to the heatsink, because it can get very hot during operation.
Do not touch the heatsink when installing or removing the module.
Moreover, the module should not be placed on any surface or in any
kind of package until the module and its heatsink have cooled down
to ambient temperature.
Caution!
If your module does not allow hotswapping, switch off the system
power before installing the module in a free slot. Disregarding this
requirement could be harmful for your life or health and can damage
the module or entire system.
ESD Sensitive Equipment!
This product comprises electrostatically sensitive components.
Please follow the ESD safety instructions to ensure module's
operability and reliability:
n
Use grounding equipment, if working at an anti-static
workbench. Otherwise, discharge yourself and the tools
in use before touching the sensitive equipment.
n
Try to avoid touching contacts, leads and components.
Extra caution should be taken in cold and dry weather.
