Page 8
NOTE:
If your jack does not retract
far enough to make the Flip automatic
jack foot rotate up completely, or
if there is an obstruction below the
frame that keeps the jack foot from
rotating completely,
you may add
additional rings
to take up that
space.
Additional rings are available from
your dealership, or directly from
Fastway
®
at
www.FastwayTrailer.com
More than one ring can be used
if necessary.
it only to the point that the Flip jack foot can
pivot freely up and down, but not enough that it is
sloppy or that there is too much play between the
jack foot and the inner jack tube. If the jack foot
does not drop smoothly into place, this nut may
need to be loosened slightly.
A small amount of lubricant
helps the Flip
rotate more freely. Do not use petroleum based
grease. Use a wax-based bicycle chain lubricant
or a spray-on, silicone-based lubricant that
naturally repels dust and dirt. Apply lubricant to
any surface area that rubs against another during
Flip foot operation, such as the top and bottom
of the 1 3/4” ring, top of the Flip foot, and inner
edges of the bolt-guide slot. Wipe off any excess.
Finished assembly of Flip
jack foot on round jack.
Lubricate
here
