Bronze 1.4
FASTTEL Klipsenstraat 18A 9160 Lokeren
Tel : + 32 (0) 9 244 65 20 FAX:+ 32 (0) 9 244 65 29 Email: [email protected]
Web : WWW.FASTTEL.COM
13
If m = *, i can be a random number
Aa = index code 01 up to 40
xxxx = code with 4 digits and terminate with #
* Resetting all codes: 920
#
9. Setting Day/Night
Adjusting Day/Night function
This function is practical when in the evening another number has to be reached, so you do
not have to program a new number.
In the standard Wizard, you can set one day/night number.
The even numbers are day numbers, the uneven ones are night numbers.
Eg.
710 xxxxxxx
#
= day
711 xxxxxxx
#
= night
If you wish to use the night number as second day number, you use code 650.
This number will be dialled when occupied or when there’s no answer on the first
destination.
How ?
Code
6 50
two destinations active Day (default)
Code
6 51
first destination active day second destination night
You can switch between day and night destinations on 2 ways:
Manualy:
Call the Wizard and form the code
Code
#
8X
Day, two short beeps
Code
#
8X
Night, two long beeps
(X = the number of the push button, in case of Wizard with several push buttons). For this
function do not form *1996*. Just ring to the wizard and enter #81 for the first button.
Automatically
The changeover can also proceed automatically using the optional data module FT4SW of FT8SW. An
external relay provides this module with a closed contact, which in turn will switch the Wizard in
daytime operation or nighttime operation.
This can, for instance, be done by means of a timer, or when an alarm is activated.
Just like the case can be when setting the device manually, you can also change over all buttons
simultaneously.
Code 170: use daytime/nighttime serial commands for individual daytime/nighttime operation for
each separate button.
Bronze 1.4
FASTTEL Klipsenstraat 18A 9160 Lokeren
Tel : + 32 (0) 9 244 65 20 FAX:+ 32 (0) 9 244 65 29 Email: [email protected]
Web : WWW.FASTTEL.COM
14
Code 171: use daytime/nighttime serial commands for overall daytime/nighttime operation: all
buttons simultaneously
10. Setting ‘end of conversation’ code
You can let the conversation end automatically or by forced switch off.
With this setting you set the code for forced switch off.
After the conversation, you enter the set code, the conversation will immediately end.
Some centrals either send a 425 Hz hooktone, or a DTMF tone. This setting lets you select
this DTMF tone.
How ?
Code
4 00 no DTMF
4 01
digit
1
4 02
digit
2
4 03
digit
3
Code
4 04
digit
4
4 05
digit
5
4 06
digit
6
4 07
digit
7
Code
4 08
digit
8
4 09
digit
9
4 10
digit
10
4 11
letter
*
Code
4 12
letter
#
4 13
letter
A
4 14
letter
B
4 15
letter
C
Code
4 16
letter
D
Attention !
When the end conversation code is the same as the code for activating the (door) contact,
then the (door) contact will automatically be first activated, after which the connection will
be ended.
11. Setting (door) contact code
This code allows you to operate the (door) contact.
With this setting you can select the code that determine what digits on your telephone
keyboard will be used to activate the (door) contact. Default 202. So enter 2 via the
telephone.
How ?
Code
2 00 no DTMF
2 01
digit
1
2 02
digit
2
2 03
digit
3
Code
2 04
digit
4
2 05
digit
5
2 06
digit
6
2 07
digit
7
Code
2 08
digit
8
2 09
digit
9
2 10
digit
10
2 11
letter
*
Code
2 12
letter
#
2 13
letter
A
2 14
letter
B
2 15
letter
C
Code
2 16
letter
D
Attention !
If the “end of conversation” code is the same as the code for operating the (door) contact, dan the
door contact will automatically be first operated, and then the connection will be ended.
Extra function
The wizard Bronze has thus 1 relay on board. The user can activate this relay by pushing the 2 on his
telephone keypad. If the user desires more than 1 relay or/and he wishes not to have the relay at the
