manualshive.com logo in svg

Fastfame 9VAAV, Руководство пользователя

Поделиться
Скачать
Fastfame 9VAAV Скачать руководство пользователя страница 45

45

9VAAV User’s Manual

except the CPU will be shut off.
The Choice:Disable,10Sec-1Hour.

VGA
When set to On (default), any event occurring at a VGA port will awaken
a system which has been powered down.
The Choice: ON,OFF.

LPT & COM
When set to LPT/COM(default), any event occurring at a COM(serial)/
LPT (printer) port will awaken a system which has been powered down.
The Choice: LPT/COM,NONE,LPT,COM.

HDD & FDD
When set to On (default), any event occurring at a hard or floppy drive
port will awaken a system which has been powered down.
The Choice: ON,OFF.

PCI Master
When set to On (default), any event occurring at will awaken a system
which has been powered down.
The Choice: ON,OFF.

Modem Ring Resume
When set to Enabled, any event occurring to the Modem Ring will awaken
a system which has been powered down.
The Choice: Enabled, Disabled.

RTC Alarm Resume
When Enabled, your can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode
The choice: Enabled, Disabled.

Primary INTR
When set to On (default), any event occurring at will awaken a system
which has been powered down.
The Choice: ON,OFF.

The following is a list of IRQ's, Interrupt ReQuests, which can be ex-
empted much as the COM ports and LPT ports above can.  When an I/O

Содержание 9VAAV

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды