Fastfame 9VAAV, Руководство пользователя

Страница: 44 / 64

44
9VAAV User’s Manual
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to turn off the
vertical and horizontal synchronization ports and write
blanks to the video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Support Initial display power management signaling.
MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The choice: 3, 4, 5, 7, 9, 10, 11, NA.
Soft-Off by PWRBTN
When Enabled, turning the system off with the on/off button places the
system in a very low-power-usage state, with only enough circuitry re-
ceiving power to detect power button activity or Resume by Ring activity.
The Choice: Instant-Off, Delay 4 Sec.
PWRON After PW-Fail
A traditional ATX system should remain at power off stage when AC power
resumes from power failure. This design is inconvenient for a network
server or workstation, without an UPS, that needs to keep power-on. This
item is used to solve this problem. Selecting On lets the system can auto-
matically power-on after AC power resumes; in the other hand, the sys-
tem will power-off if you select Off. If Former-Sts option is selected, the
system will power-on or power-off based on the original state.
The Choice: off, on, Former-Sts.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk
drive will be powered down while all other devices remain active.
The Choice:Disable,1-15Min.
Doze Mode
When enabled and after the set time of system inactivity, the CPU clock
will run at slower speed while all other devices still operate at full speed.
The Choice:Disable,10Sec-1Hour.
Suspend Mode
When enabled and after the set time of system inactivity, all devices