Fastfame 3SLAV2, Руководство пользователя

Страница: 14 / 64

14
3SLAV2 User’s Manual
2-2 System Memory (DIMM)
The motherboard supports up to 512MB 100/133MHz SDRAM. No hard-
ware or BIOS setup is required after adding or removing the system memory.
Note:
1. The motherboard uses only Dual Inline Memory Modules (DIMMs). Sock-
ets are available for 3.3Volt (power level) Synchronous Dynamic Random
Access Memory (SDRAM).
2. The 100/133 MHz compliant SDRAM must be used because of the strict
timing issues involved under this speed.
Installing system Memory
Insert the DIMM module(s) as shown. Because the number of pins are differ-
ent on each side of the breaks, the module will be fitted only in the orienta-
tion shown. The DIMM must be 3.3V for this motherboard.