FASTERHOLT GT12, Руководство пользователя и каталог запасных частей

Страница: 22 / 76

22
MENU 6 MENU 6
SIGNAL GSM signal strength.
NETWORK GSM network
A: First number on "SMS" list.
B: Second number on "SMS" list.
See GSM chapter for details.
START: START:
The turbine can only start if the magnet is aligned with the end stop sensor (or end stop sensors). See menu 3 for The turbine can only start if the magnet is aligned with the end stop sensor (or end stop sensors). See menu 3 for
control of the control of the STOP SENSOR STOP SENSOR . Press the . Press the START START key to turn on the water. The regulator valve for bypass around the key to turn on the water. The regulator valve for bypass around the
turbine then closes. (Turbine starts). If the end stop sensor is not in place, only the main valve can be opened, which turbine then closes. (Turbine starts). If the end stop sensor is not in place, only the main valve can be opened, which
then immediately closes again. Used to relieve pressure before removing charge hose from hydrant. then immediately closes again. Used to relieve pressure before removing charge hose from hydrant.
DEFERRAL OF START TIME DEFERRAL OF START TIME
First press the STOP STOP key to shut off the water. Then press the MENU MENU key 3 � mes and PROG PROG 3 � mes. The start � me can
be set using the "+" and "-" keys. Finally, select pre- and post-irriga� on. To exit, press MENU. MENU. Info: The clock can only
be set forwards.
STOP: STOP:
When the magnet is removed from the end stop sensor, the turbine stops and the main valve shuts off the water When the magnet is removed from the end stop sensor, the turbine stops and the main valve shuts off the water
(turns on the water at nega� ve pressure). If post-irriga� on is selected, rewinding stops when the magnet is removed (turns on the water at nega� ve pressure). If post-irriga� on is selected, rewinding stops when the magnet is removed
from the sensor. When the post-irriga� on � me has elapsed, the main valve closes. When the from the sensor. When the post-irriga� on � me has elapsed, the main valve closes. When the STOP STOP key is pressed, the key is pressed, the
turbine stops immediately and the main valve shuts off the water, regardless of whether post-irriga� on is selected. turbine stops immediately and the main valve shuts off the water, regardless of whether post-irriga� on is selected.
SUPERVISION: SUPERVISION:
Program Rain has a built-in supervision system. The supervision system will be ac� vated if for any reason the machine Program Rain has a built-in supervision system. The supervision system will be ac� vated if for any reason the machine
has water in the same loca� on for longer than a specifi ed � me. This � me is factory-set to 20 minutes. If the � me is has water in the same loca� on for longer than a specifi ed � me. This � me is factory-set to 20 minutes. If the � me is
set to 0, there is no supervision. (See constants on page 17 for se� ng the supervision � me.) If speed supervision less set to 0, there is no supervision. (See constants on page 17 for se� ng the supervision � me.) If speed supervision less
than 50 % of pre-selec� on is required, select speed supervision together with the above � me. than 50 % of pre-selec� on is required, select speed supervision together with the above � me.
SPEED: SPEED:
The speed is set using the "+" and "-" keys. First count up in steps of 0.1 m/h. A� er 10 steps, count up in steps of 1 The speed is set using the "+" and "-" keys. First count up in steps of 0.1 m/h. A� er 10 steps, count up in steps of 1
m/h. The speed can be changed at any � me during irriga� on. If the speed changes during irriga� on, the dose and m/h. The speed can be changed at any � me during irriga� on. If the speed changes during irriga� on, the dose and
� me for the remaining irriga� on will be calculated immediately based on the new speed. � me for the remaining irriga� on will be calculated immediately based on the new speed.