10
REMEMBER when unwinding the hose to ensure that the gun trailer lift is adjusted
correctly. And remember to make sure the machine is standing on fi rm ground, otherwise
damage may occur to the gun trailer lift and machine.
Connect the gun trailer to the tractor and start unwinding the hose. The unwinding speed
must not exceed 3 km/h.
If the water has not started to fl ow out of the machine after about 10 metres, it may be
benefi cial to stop unwinding for a moment and start again.
It is important that the gun trailer is unwound in line with the machine for the fi rst 10
metres of unwinding, as excessive movements may prevent the gun trailer from entering
the gun trailer lift.
WARNING: Never unwind the hose too far – always ensure that there are at
least 2 hose turns left on the drum, otherwise the hose coupling will be damaged
when the hose is rewound. Driving on hilly terrain may therefore require an
assistant or a warning lamp, which can be purchased separately.
WARNING: If the hose temperature exceeds 30 degrees, e.g. due to the machine
being in sunlight, cool it by fl ushing water through the hose before unwinding
it, to avoid damage to the hose. Unwind the machine 2-5 metres to activate the
limit stop sensor. This to stop water from passing through.
When unwinding the hose, it is important to avoid suddenly braking/stopping the tractor,
as the hose may tangle on the drum. Instead, slow down gently and stop.
If the hose becomes loose on the drum during unwinding, adjust the drum brake. If the
hose is loose on the drum when fully unwound, tighten it with the PTO crank handle.
REMEMBER
to remove the PTO crank handle after tightening. Never place the crank
handle on the machine's PTO input during unwinding or operation. Never release/put the
clutch lever in neutral position when the crank handle is on the machine's PTO input and
the hose is in tension.
When the hose is fully unwound, close the slide valve of the gun trailer again.
Setting up the Gun trailer
Содержание GT12
