CÔNG TY CỔ PHẦN FASTER VIỆT NAM
Địa chỉ: 90 Khuất Duy Tiến, Thanh Xuân, Hà Nội
Website:
http://www.faster.vn/ | Email : [email protected]
Tel CSKH: 1900 54 54 52 - Trung tâm bảo hành: 1900 54 55 95
11
During these 10 seconds the desired power level must be selected (between 1 and 8). After
this time a beep sounds, and the decimal point remains fixed, indicating the heat-up function is
ON. If the power level is 0 or 9, the heat-up function is cancelled.
Fig.11: Select power level
Fig.12: Heat Up function activated
If the heat-up function is activated, pressing the heater [+] key, the duration of the heat-up
function will be the duration for the new power level; if the new level is 9, the heat up function
is cancelled.
10.2 Cancelling the heat-up function
The Heat-up function can be cancelled either automatically, when the time expires, or when
the user wishes.
When the heat-up function is cancelled automatically, a beep sounds, the decimal point of the
display turns out, and the power level of the heater remains the selected power level.
If we press the [-] key when the heat-up function is activated, the function is cancelled
12. Residual heat time calculation for radiant heaters
(Apply for FS MIX 388, FS MIX266, FS MIX 288, FS - 2SIR)
While a temperature on the cook top glass surface is above 65ºC, this condition will be shown
in the associated display, by means of an “H”.
If the cook top
is switched off, the residual heat is shown by a static “H” in the display
Fig. 14:Residual Heat (Cooktop off)
If the cook top is on, but the power level is 0, the associated display will show alternately “H”
and “0”.
