“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel/fax:+48 58 56 300 80 www.ega.com.pl
- If the gas leaks from the appliance (gas smell), immediately take them out to a place with
good air circulation and away from flammable objects to be able to identify the gas leakage.
Tightness of the device should be checked only in the open air. Never look for leaks with a
flame, just use a soap solution for that!
- Do not touch the hot areas of the device. Allow the appliance to cool down before storage.
-
ATTENTION
: easily accessible parts can be very hot. Keep children out of the reach of
children.
- If not in use, store the device in a safe, cool place out of reach of children.
INSTALLATION OF THE APPLIANCE OR REPLACING THE GAS CONTAINER
1. Turn the adjustment knob to the "OFF" closed position. Fig.1
2. Replace or connect the gas container outside the building and
move away from other people.
3. Align the cartridge flange with the tab on
the torch and keep the torch up, gently
press and turn the cartridge 35 degrees to
the right. Fig.2, Phot.1
Phot.1
4. Make sure there is no gas leak. In the event of a gas leak on the device (gas smell), it
should be immediately transferred to a well ventilated, flame-free place where the leak can
be detected and stopped. If you want to check if there are any leaks in the application, do it
outside the building. Do not try to detect leaks with a flame, use soapy water.
ATTENTION!
1. Check that the gaskets are in place and in good condition before installing the container.
2. Do not use the device if it has damaged or worn seals.
3. Do not use a device that is leaking, damaged, or not working properly.
4. Use only in well-ventilated areas.
5. The device should be used away from flammable materials and keep a minimum
distance of 1 m from adjacent surfaces (wall, ceiling).
6. Replace the gas container in a well ventilated area, preferably outside the building, away
from sources of ignition, such as open flames, fireplaces, electric fireplaces and other
people.
WARNING
! If gas escapes from the device (smell of gas), immediately take it outside in a
place with good air circulation and away from flammable objects, in order to identify the
place where gas escapes. Tightness of the device should be checked only in the open air.
Never look for a leak point with a flame, just use a soap solution! Keep the device under
observation until the gas has completely disappeared.
Содержание 8998
Страница 12: ......