“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel,/fax:+48 58 56 300 80 www.ega.com.pl
must be repaired before use if it is damaged. Many accidents are caused by poorly maintained
electrical tools.
m)
The cutting tools must be sharp and clean. Properly maintained cutting tools with sharp cutting
edges are much less likely to get stuck in the work material and are easier to handle.
n)
Use only accessories recommended for the model by the manufacturer. Accessories that are
specific to the one power tool may pose a risk when are used in the another device.
WARNING!
The device is designed for indoor use. Despite of a safe structure from the very foundation
and use of protective measures and additional protective measures, there is always a risk of residual
injury during work.
5. Service
Service and repairs may only be performed by qualified technicians.
Corrective or maintenance actions performed by an unqualified person may contribute to the risk of
injuries.
6. Technical data
While using the device, follow the safety instruction to avoid injuries and damages. For this
reason, please read carefully the operating instruction / safety instruction. Please, keep the
instruction and guidelines so that you can return to it at any time. In case of transfering the
tool to another person, please give to the user manual/safety guidelines as well. We are not
responsible for accidents and damages caused by non-observance of the instruction and
safety guidelines.
