9
10
4) Countersink Adjustment
Prior to operating the
PAMFast
AutoFeed
tool, ensure that the countersink ring in
set to the proper screw length.
• Turn the countersink ring clockwise
to increase and counterclockwise to
decrease. Each click represents
1
⁄
64
"
adjustment to the countersink depth.
5) Extension
(Changing between stand-up tool & short tool)
The extension pole can be removed for applications that require
a shorter version of the tool.
(Fig 5a)
• Remove the 1– 3" attachment from the end of the
PAMFast
tool
by loosening the wingnut and pulling the attachment. (5.1)
• Twist the extension handle counterclockwise to loosen the
handle assembly. Slide the handle assembly away from the
screw gun motor to expose two hex screws. (5.2)
• Using the 3mm Allen wrench provided with your
PAMFast
tool, loosen the two hex screws. Use caution when loosening
these screws as not to drop them. (5.2)
• Pull the extension pole away from the motor by twisting
and pulling simultaneously. The extension pole is designed
to require some force to pull away from the motor.
• Remove the inner rod by pulling it away from the motor.
• Insert the drive bit into the short bit holder. (5.2)
Extension
(Continued)
• Remove the drive bit from the end of the extension pole
and insert it into the short bit holder. The short bit holder
and adapter will replace the inner rod and extension pole
respectively. (5.3)
• Slide the 1-3" attachment over the bit until it sets
securely in place and then tighten the wing nut. (5.4)
Fig. 4a
Fig. 5a
Setup and Adjustment
(continued)
Setup and Adjustment
(continued)
I
Warning
Improper set up of the
PAMFast
tool will lead to
incorrectly installed screws and could damage the
PAMFast
tool.
Please call 800·518·3569 or visit fastenmaster.com
to contact a technical specialist if assistance is needed.
Short Handle Conversion
Long Handle Extension
5.1
5.2
5.3
5.4
