Fastech Ezi-Step BT-42 Series, Руководство по эксплуатации

Страница: 5 / 28

3 - www.fastech.co.kr
FASTECH Co.,Ltd.
Stop supplying power to the main circuit and wait for a while before
checking or repairing the Ezi-STEP BT.
Electricity remaining in the capacitor may cause danger.
Do not change cabling while power is being supplied.
Otherwise, the user may get injured or the product may get damaged.
Do not reconstruct the Ezi-STEP BT.
Otherwise, an electric shock may occur or the reconstructed product
can not get After-Service.
◆
Check and Repair
Warning
If a protection function(alarm) occurs, firstly remove its cause and
then release(alarm reset) the protection function.
If you are operating continuously without removing its cause, the
machine may get damaged or the user may get injured.
Do not make Motor Free and make input signal to ON during
operation.
Motor will stop and stop current will become zero. The machine may get
damaged or the user may get injured.
Make all input signals to OFF before supply input voltage to
Ezi-STEP BT.
The machine may get damaged or the user may get injured by motor
operation.
All parameter values are set by default factory setting value.
Change this value after reading this manual throughly.
Otherwise, the machine may get damaged or other kinds of accidents
may occur.
◆
Operation
Attention