14
Switch the machine on and select binding mode by
pressing MODE -button (h):
a - Single side, normal staple density
b - Single side, high staple density
c - Double side, normal staple density
d - Double side, high staple density
e - Manual operating mode
f - Ring mechanism: single side stapling for papers with
punched holes for A4 / US letter ring binders.
Step 2 is for hard and soft cover books only. If you are
making strip or staple backs, skip to step 3.
Place one end sheet on the front and one on the back
of your block. Make sure the silicon paper is facing
outwards and the buffer towards the spine.
Tip! Store your end sheets in the supply shelf to access
them easily.
Jog the papers on worktop to make them even. Place the
book block in positioning deck (between worktop and
back support).
Align the book block against the paper guide.
Step 4 is for strip back binding only:
Place a strip of suitable length in the position deck and
align it in front of the paper block. Make sure the silicon
paper is visible and the glue-free area is on the bottom.
9. HOW TO BIND YOUR BOOK (BOOXTER TRIO)
1.
2
9. HOW TO BIND YOUR BOOK (BOOXTER TRIO)
SELECT BINDING MODE
RING HOLE
(A4 / LTR)
MANUAL
(PEDAL)
MODE
START
STOP
a
b
c
d
e
f
PLACE THE PAPER BLOCK
3
4
g
h
J
FASTBIND BooXTer Uno/Duo/Trio USER MANUAL | Version 0.1 | © Maping Co 2010
