Chinstrap
Anchor
Screw
T-Nut
Front Shell Hole
BUNGEE INSTALLATION
Insert the bungee ends into the FAST Side Rail’s Bungee
Retention Slot before assembly.
Side Rail
(Inside Shown)
Bungee Retention Slot
Align the new FAST Side Rails with the existing Chinstrap Holes on your FAST helmet. Loosely
assemble the FAST Side Rails, Helmet Chinstrap Anchors, and new hardware by following the
diagram below. Repeat for opposite side of helmet. Once all components are loosely assembled,
finish by using a screwdriver to tighten the two front screws.
Leave rear screws loose before executing
instructions on pages 6-7.
22
REPLACEMENT FAST SIDE RAILS
Содержание WORM-DIAL
Страница 24: ...MADE IN USA OPERATOR NOTES...