Fast UT3P25, Руководство пользователя

Страница: 65 / 104

FILLING THE TANKS
FILLING THE TANKS Utility Sprayer 25' / 30' / 40' / 45' Page 65
7. Follow the chemical manufacturer’s
directions for adding chemical to the
tank.
8. Insert a water hose into the tank. Be
sure the hose is far enough into the
tank to prevent spilling. Hold the
those in the tank to prevent it from
coming out of the tank.
9. Slowly turn on the water supply. Use
a low pressure to prevent splashing
and spilling.
10. Fill the tank with the required amount
of solution. Use the tank scale on the
side as a guide. Do not overfill the
tank.
11. Lift the water hose above the tank
before turning off the water supply to
prevent drawing chemicals into the
hose line.
12. Turn off the hose and allow all fluid to
drain from it before removing it from
the tank area.
13. Remove and properly stow the hose.
14. Replace the cover by turning it
clockwise until it is tight.