Fast UT3P25, Руководство пользователя

Страница: 46 / 104

PREPARING THE MACHINE
PREPARING THE MACHINE Utility Sprayer 25' / 30' / 40' / 45' Page 46
Pre-Operation Checklist
Efficient and safe operation of the machine
requires that each Operator reads and
understands operating procedures and all
related safety precautions outlined in this
section. A pre-operational checklist is
provided for the Operator. It is important for
both personal safety and maintaining the
good mechanical condition of the Sprayer
that this checklist be followed.
Before operating the Sprayer, complete the
following items:
1. Lubricate machine per the
schedule outlined in the
LUBRICATION and
MAINTENANCE section.
2. Use only a tractor of adequate
power and weight to operate the
Sprayer. See the
SPECIFICATIONS section for
recommendations.
3. Gather and apply all required
PPE before filling, operating, or
servicing the machine.
4. As per the Intended Use, be sure
that the tractor’s operator station
is enclosed and pressurized.
5. Read and understand the
Operator’s Manual and all safety
signs on the equipment.
6. Read and understand the
chemical manufacturer's
information.
7. Confirm this Manual, any SDS
sheets used for chemicals, and
emergency contact information
are on-board the machine.
8. Know and follow all state, federal,
and local regulations for use,
handling, and transport of this
equipment and chemicals.
9. Inspect all hydraulic lines, hoses,
fittings, and couplers for
tightness. See Tightening
Hardware for break-in period
recommendations.
10. Check the condition and routing
of all fluid hoses and lines. Be
sure that all lines are routed in
large arcs. Replace any that are
damaged. Re-route those that
are rubbed, pinched, or crimped.
See Replace Hydraulic Hoses .
11. Check placement components.
Remove and replace any that are
worn.
12. Remove all entangled material.
Replace any plugged nozzles or
tubes.
13. Check the weather conditions.
Use the machine only when the
potential for chemical drift is
minimal.