- 3 -
1.3 Description
The Lokal 200 PC is supplied in an ABS case which consists of the following components. A central
component of the Lokal 200 PC is the laptop (Illustration 1-3,
point 1
) with the correlator programme to
control the correlator box and to process the measurement values received. Normally, the correlator box,
which receives the measurement signals from the measurement boxes, is firmly installed inside the case.
Only the USB connection cable (Illustration 1-3,
point 2
) is visible and has to be connected to the laptop
inside the case. If the laptop has not been supplied by F.A.S.T., please make sure that your laptop meets the
system requirements as listed in Chapter 1.3.5.
Illustration 1-3: Lokal-200PC
Another component integrated in the case is the control panel as can be seen in Illustration 1-3,
point 3
.
This control panel hosts additional control elements and operating controls which are described in detail in
Chapter 1.3.1. The plug-in connectors as can be seen under
point 4
(see Illustration 1-3) to connect the
aerial and for power supply purposes are described in Chapter 1.3.2.
1.3.1 Control panel
If the Lokal 200 PC is connected to a vehicle and operated with the 12 volt power cable, the red LED as
described under
point 1
(Illustration 1-4) is lit permanently. If, however, no power cable has been
connected and the correlator is operator by means of accummulators, the LED as shown under
point 8
is
lit red. If the voltage for the correlator box drops below operating voltage, this LED (Illustration 1-4,
point
