Fast DP18L, Руководство пользователя

Страница: 65 / 81

CHEMICAL EDUCTOR
CHEMICAL EDUCTOR Liquid DuraPlacer DP18L / DP24L Page 49
CHEMICAL EDUCTOR
CAUTION: Read the operating
instructions completely before using
Cleanload ™.
•
Always read and follow the chemical
label instructions exactly. Understand
safe practices for chemical handling,
mixing, loading, cleaning, and first
aid.
•
Always wear proper Personal
Protective Equipment (PPE) when
handling chemicals, including gloves,
eye protection, a respirator, and
safety shoes.
•
Always pay attention to wind
conditions when dumping chemicals
into the Cleanload™ hopper tank.
Always stand up-wind when dumping
in windy conditions. Also make sure
that there are no other people
downwind prior to dumping.
•
Always check to make sure that there
are no loose objects surrounding the
Cleanload™ that could cause
damage to the hopper tank or hoses.
•
When operating the Cleanload™ at
night, ensure lighting of 200 to 300
Lux is present.
CAUTION: IMMEDIATELY close the
hopper lid and SHUT DOWN the
system if leaks, errant spray,
operation error, or malfunction occur.
Before Operation
1. Ensure all Cleanload™ valves are
closed prior to starting and inspect
them for leaks.
2. Unlock the lid by turning it
counterclockwise and open it. Inspect
the hopper for cleanliness, remove
foreign objects, and ensure the
optional hopper outlet screen is
properly seated.
3. Close the lid and lock it by turning it
clockwise. Gently lift the lid to ensure
it is locked closed. If the lid will not
close, will not lock, or is damaged,
STOP and repair it before further use.
Rinsing the Hopper
The Cleanload™ is equipped with a
ProClean™ Container Rinse System. It can
be used to rinse empty liquid containers
using these steps:
1. Place the container to be rinsed
upside down over the nozzle at the
bottom of the hopper.
2. Holding the container securely with
two hands, press down to activate the
CONTAINER RINSE VALVE (D) for
30 seconds or longer until container
is visibly clean.
3. When the container is visibly clean,
stop pressing down. The
CONTAINER RINSE VALVE (D) will
close, and the spray will stop. Let the
container drain until empty, then set it
aside for proper recycling or disposal.
4. Operate the Sidewall Rinse System
for 30 additional seconds or longer to
flush residues, and then close the
SIDEWALL RINSE VALVE (C).
D
C