Operating Manual
Aqua M40
F.A.S.T GmbH
A40 2014
F.A.S.T. GmbH
Bössingerstrasse 36
D- 74243 Langenbrettach
Page 2
This measuring device has been designed according to state-of-the-art technology and meets
all relevant requirements of the applicable European and national guidelines. Conformity has
been proved, and the corresponding declarations and documentation have been filed with the
manufacturer. In order to maintain this status and to guarantee safe operation, the operator is
requested to follow the below listed safety instructions.
1
Safety instruction
•
Do not expose the device or its components to extremely high temperatures or to
powerful light sources.
•
If the device has been subject to any inappropriate application, to any modification
not authorized or approved by F.A.S.T. GmbH, or to any repair work done by any
party other than F.A.S.T. GmbH, the warranty provisions for the device shall
become ineffective. F.A.S.T. GmbH will not assume any product liability for the
device if the device has been subject to any inappropriate application or to any
application other than its intended purpose. F.A.S.T. GmbH will not assume any
liability other than the statutory product liability for any consequential damage.
•
This product is no toy! It is not suitable for children!
•
In order to avoid any hearing disorder, it is recommended not to listen to the
acoustic noise level indications with a high volume for a long time!
•
The in-built battery may be replaced by F.A.S.T. only. Do not replace or remove
the battery by yourself. If you need to dispose of the device, please dispose of it in
accordance with local regulations.
•
This Manual needs to be read carefully and to be observed in full before the AquaM40
device is applied.
•
Finding valid measuring results, making any conclusions, and deriving any measures
shall be subject to the operator’s sole responsibility. Any liability or guarantee for the
correctness of the results provided by the device is explicitly excluded, and there will
be no liability assumed for any damage resulting from the usage of the measuring
results received.
2
Intended use:
The AquaM40D Bluetooth Version is intended to transmit any leakage-borne noise signals to
the corresponding headphones via Bluetooth. The range of the central unit to the headphones
is limited to approximately 10 metres/11 yards. The noise level is indicated at the central
unit of the AquaM40D.
The AquaM40 is operated in combination with a connected sensor, extension, tripod, or pot
magnet subject to local circumstances. The frequency has to be adjusted appropriately taking
the particular material of the measured pipe section, the pressure, and the size of the leakage
into consideration.
