Fast 8295RT, Инструкция по установке и каталог запасных частей

Страница: 5 / 18

5
7. Remove tool box (8) from bracket. Tool box bracket does
not need to be removed.
Remove Center Link Bracket And
Radar
1. Remove center link (1) and mounting bracket from right-
hand side of tractor.
2. Disconnect radar harness from radar (2). Remove radar
from mounting bracket (3). Save hardware for reuse.
Remove radar mounting bracket (3).
3. Remove mounting bracket (3) from tractor. Mounting
bracket will not be reused.
Install Rear Tank Supports
1. Install right hand tank mount (1) with three M16 x 40mm
GR8.8 bolts and three M16 flat washers. Repeat on left
side using left hand tank mount, three M16 x 40mm
GR8.8 bolts and three M16 flat washers.
2. Install tank support (3) with two ½ X 1-½ '' bolts (4),
½ '' washers and ½ '' nylock nuts. Do not fully tighten
as bracket will need to be adjusted when tanks are
installed later.
3. Install rubber isolator (5) with three ½ x 1-½ ' bolts (6)
and three ½ '' centerlock nuts. Snug bolts to slightly
compress rubber. Repeat procedure for left hand side.
Note: For Ultra Wide Gauge tractor, brackets (1) and (3)
are reversed.