background image

Please keep in a safe place for future reference

1. 

 

SAFETY 

REGULATIONS 

      

2. 

 

PACKAGING 

 

       

3.  WASTE AND ENVIRONMENT 

  

 

 

 

4.  INITIAL INSPECTION 

 

                                             

5.  REQUIRED INSTALLATION  

 

 

 

6.  CHARACTERISTICS 

     

 

6.1  PRODUCTS  THAT  CAN  BE  SPRAYED 

                                       

                         

7.  ACCESSORIES 

      

 

7.1 STANDARD ACCESSORIES AND DOCUMENTATION                                 

 

7.2 OPTIONAL ACCESSORIES 

                                              

8.    WORKING  INSTRUCTIONS 

 

 

 

 

                         

9.  MAINTENANCE AND CLEANING PROCEDURE 

 

 

10. 

TROUBLESHOOTING 

     

11. EXPLODED VIEW
12. WARRANTY 

 

13. WARRANTY CERTIFICATE 

   

1. SAFETY REGULATIONS

A misuse of this equipment may result in accidents, damage or malfunctioning. Read the user and 
maintenance manual carefully.

Please, bear in mind the following rules:

• 

Ensure that the person who is going to use the gun is trained to do so. 

• 

Disconnect the equipment for any cleaning operation or any action on it, and decompress 
the circuits by pulling the gun trigger. 

• 

Always use the equipment with approved protections (gloves, protective mask, earplugs and 
proper clothing).

• 

The place where the device is used has to be ventilated or equipped with an air extraction 
system (paint booth), and there should not be direct exposure to flames (cigarette, lamp) 
while it is working. 

• 

Keep the working area clean and without waste (rags, solvents).

• 

Check the chemical compatibility of the products to be used.

• 

Never exceed the indicated maximum pressures.

• 

Never use worn, folded, broken or leaking hoses.

• 

Do not point the gun at people or animals.

• 

The gun is not suitable for children.

• 

Do not use the gun for those operations for which it has not been designed.

• 

The use of halogenated hydrocarbons products may cause chemical reactions in form of 
explosions, for this reason, the use of products that contain them is forbidden.

2. PACKAGING 

The FMT9800 guns are presented in a cardboard box.   All its standard accessories are inside the 
packaging.

Содержание FMT9800









Отзывы: