FMT626
Instruction Manual
Fast Mover Tools Limited
Unit 1 Frenchs Avenue, Dunstable, Bedfordshire, LU6 1BH, United Kingdom
Specification
Tool Use
Air Inlet
1/4”
This tool is ideal for
Working Pressure
30-120PSI/2-8.3BAR
applying sealents to
Maximum Pressure
150PSI/10BAR
vehicles and other
industrial applications.
General Safety Instructions
1
Users must choose the correct spraygun, with suitable setup and paint flow, for the job
requirement.
2
Before connecting the spraygun, check the air pressure available is suitable.
3
Follow all HSE guidelines regarding sprayguns and their use as well as your own
Health & Safety Policy.
4
Switch off air source before refilling, cleaning or servicing the spraygun.
5
Never leave your spraygun exposed to dust, silicone, acids vapors, explosive or
flammable gases, rain, sun, fog or snow.
6
Ensure the air line cannot be twisted, pinched or damaged.
7
NEVER carry tool by the air hose.
8
Never expose air hose to heat, oil, water or sharp edges.
11
DO NOT allow children to use or play with this tool or enter the work area.
12
DO NOT store this tool in a place that is within reach or accessible to children or
unauthorised persons.
13
Store this tool in a dry and secure location.
14
DO NOT open or tamper with any part of this tool. Cleaning and servicing of the
spraygun is permitted but repairs can and must only be carried out by an authorised
service centre.
IMPORTANT
Please read through this Manual carefully before using the FMT626.
This tool must only be used for spraying and within the parameters
outlined in this manual. All users of the equipment should be trained in
any risks associated with the products they are spraying or using as
spraying and finishing aids.
Wise Precaution
This product is free from
contaminants.
However, we do
recommend that you flush
your gun through with a
suitable thinner before use
as a preventative
precaution.
Fluid Nozzle
Hook
Trigger
Feed Pipe
1/4” Air Inlet
Air
Regulator
Removalble
Extension Pipe
Screw Cap
FMT626_Product Instructions 14/07/2014 11:05 Page 2
