Fast Flow Pumps Fast Flow 3 Скачать руководство пользователя страница 15

 15 

 

Warranty Informa on 

Warranty for Submersible Pumps, Fast Flow Pumps warrants to the original purchaser only that this 
product is free from defects in material and workmanship, and agrees to repair or replace, at Fast Flow’s 
option, any submersible pump part found to be defective within 12 months from the date of purchase. This 
warranty is not transferable. This warranty does not cover damages resulting from shipping damage, 
improper installation, lack of service, incorrect power, or faulty severe service applications such as pumping 
abrasives, rocks, corrosives, or fluids in excess of 160°

F

 

Warranty coverage is normally not available for 

wear parts such as: 

 

Pump Volutes, Impellers, drive shaft, and hydraulic motor seals. Any modification or 

alteration of this equipment will void the warranty. 

 

Any claim for warranty damage must include photos of 

the defective part or parts, the serial number from the equipment, and a detailed description of the defect 
and possible causes. 

 

All warranty claims should be emailed to

 

www.fastflowpump.com

  

or mailed to our 

Moss Point MS address. 

       

 

Submersible Pumps judged by Fast Flow Pumps to have been defective in workmanship or materials when 
shipped from the factory and within the warranty period will be either repaired or replaced at 

  

option free of 

charge excluding motor freight both ways, within the continental United States.

 

 

Fast Flow LLC Limited Warranty for Hydraulic Power Units.

 

 Fast Flow Pump warrants to the original 

purchaser that this product is free from defects in material and workmanship, and agrees to repair or 
replace, at our option, any part found to be defective within 12 months or 500 hours of use (whichever 
comes first) from the date of purchase. 

 

This warranty is not transferable. This warranty does not cover 

damages resulting from normal wear, abuse, careless handling, lack of service / proper preventatives 
mainentance, improper fueling, improper application, and improper operation. Warranty coverage is not 
normally applied for items such as: Tires, belts, hoses, (fuel, oil, hydraulic oil) filters, batteries, and paint.

 

 

 

Fast Flow LLC does not warranty engines 

 warranty claims for engines must be handled through the 

engine distributor.

 

 Any modification or alteration of this equipment will void the warranty. Any claim for 

warranty damage must be accompanied by digital photos of the defective part or parts, the serial number 
from the equipment, and a detailed description of the defect and possible causes.

  

 

All warranty claims should contact Fast Flow Pumps at 9700 Hwy 63, Moss Point, MS 39562. 

 

Power Units 

judged by Fast Flow Pumps to have been defective in workmanship or materials when shipped from the 
factory and within the warranty period, will be either repaired or replaced at the discretion of Fast Flow 
Pumps free of charge excluding motor freight both ways.

 

   

Fast Flow Pumps shall not be liable for any damages, including consequential damages arising out of any 
breach of warranty and whether or not arising out of or based on Fast Flow’s negligence, whether actual or 
implied, and for damages to any property or person arising out of the purchase or the use, operation or 
maintenance of the equipment. Fast Flow shall not be responsible for repairs or alterations made by 
others. 

 

No person is authorized to make any representations or warranties on behalf of Fast Flow Pumps 

and no other person is authorized to alter or extend any of the conditions contained in this warranty.

 

Содержание Fast Flow 3
















Отзывы: