background image

MAINTENANCE

7

REPAIRS:

The user must not operate in case of malfunctioning of the machine, but s/he 
has to contact specialized personnel (refrigerator technicians) or the warranty 
will be invalidated.
The user is responsible for cleaning and check such as:

a)

 every week control the main conductive and plug conditions, visually.

b)

 Control that machine has not liquid losses.

c)

 Control that the suction and exhaust grilles are not obstructed or blocked.

d)

 Clean the machine as following instructions advice.

NO COMPONENTS CAN BE REPLACED DIRECTLY BY THE USER 

EXCEPT THE BARRIER-BAGS (*) AND POSSIBLY THE COOLING 

LIQUID (FILLING UP AND REPLACEMENT)(*) IF DAMAGED

CLEANING:

Daily instructions for user

Visible surface have to be cleaned using a cleaned cloth and dampened with a 
diluted mixture of lukewarm water and neutral detergent.

DO NOT USE WATER OR STEAM TO CLEAN THE MACHINE BEFORE 
DISCONNECTING IT FROM ELECTRIC CURRENT,   REMOVING 
ELECTRIC CABLE FROM PLUG.

DO NOT SPRAY WATER OR ANY LIQUID DETERGENT ON THE MACHINE 

IT'S IMPORTANT THAT GRILLES ARE WELL CLEANED 
FOR AN OPTIMAL COOLING AIR PASSAGE.

WITH A HAND REMOVE FROM THE WELL THE FROST INNER THEM. DO 
NOT USE RIGID AND ANGULAR BODIES  WHICH COULD CAUSE THE 
BREAKING OF BARRIER SACK.

Содержание TT3
















Отзывы: