FAST & FLUID MANAGEMENT srl
A Unit of Idex Corporation
3
4. WARRANTY TERMS AND CONDITIONS
WARRANTY
FAST & FLUID MANAGEMENT THE NETHERLANDS guarantees every machine to be free from material and
assembly defects.
Please refer to terms and conditions of sale in force when the machine was bought.
The damaged parts must be sent to FAST & FLUID MANAGEMENT THE NETHERLANDS with forwarding costs
prepaid by the user.
If the defect is caused by improper or abnormal use, the repairs will be billed at normal cost. In this case an estimate
may be submitted before starting repairs, if required.
ALWAYS STATE THE SERIAL NUMBER OF THE MACHINE IN ANY CORRESPONDENCE CONCERNING SPARE
PARTS. The serial number is located on the left side of the machine body.
These agreements must be interpreted according to the laws of the Netherlands and for any dispute the court of
Sassenheim shall have competent jurisdiction.
The manufacturer’s warranty expires:
•
in case of improper use
•
in case of use of non-original spare parts
•
in case of repairs/adjustments to the machine without written approval and/or by unauthorized staff
•
in case of incomplete maintenance, or failure to observe the instructions contained in this manual
The above conditions are applicable if there are not other conditions expressly agreed on.
5. GENERAL DESCRIPTION
FAST & FLUID MANAGEMENT high speed shaker SO300 has been designed to work in both in paint shops
and for semi-industrial applications.
FAST & FLUID MANAGEMENT high speed shaker SO300 has been designed to fulfil the needs both of the
retail business with limits in products capacity/quantity and the professional and semi-industrial business with
the possibility of handling big cans with a height up to 440 mm and weight of up to 35 kg.
The machine requires a very little maintenance and paint can be produced at a low cost.
The system works with an automatic blocking and shaking device, for a time set by the customer.
For further explanation, please see chapter 10.
6. SAFETY RULES
WORKING AREAS
MAINTENANCE AREA
OPERATOR AREA
Compliance with security requirements
The machine must be used and serviced by qualified personnel only, since the bad/wrong use might cause
damages or accidents.
Area
The areas of risk are:
working area
maintenance area