FAST AG Solutions 973PT Скачать руководство пользователя страница 45

Страница: 45 / 81

ATTACHING and DETACHING

ATTACHING and DETACHING

3PT Sprayer 973PT

Page 45

7-Pin Connector Warning Light Plug

Attach a warning light plug (A) to the tractor’s

outlet socket.

Be sure warning lights, reflectors, and SMV

emblem(s) are clean.

Connect Rate Controller or

Nutrient Applicator System

Wiring

See manufacturer's Manuals for connecting

controller cables to the tractor.

Make Proper Hose Connections

WARNING: Escaping fluid under

pressure can penetrate the skin and

cause serious injury. Avoid the hazard

relieving

pressure

before

disconnecting any hydraulic or other

pressurized

lines.

Tighten

all

connections

before

applying

pressure. Search for leaks with a

piece of cardboard. Protect hands and

body from high-pressure fluids.

If an accident occurs, see a doctor

immediately. Any fluid injected in the skin

must be surgically removed within a few

hours or gangrene may result. Doctors

unfamiliar with this type of injury should

reference a knowledgeable medical source.

Such information is available from Deere &

Company Medical Department in Moline,

Illinois, U.S.A.

IMPORTANT: Hydraulic hoses can fail

due to physical damage, kinks, age,

and exposure. Check hoses regularly.

Replace damaged hoses.

IMPORTANT: All hydraulic couplers

must be clear of debris, dust, and

sand. Use protective caps on fluid

openings until ready to make

connection. Foreign material can

damage the hydraulic system.

SCV Marker

Hose Key Chart

Identify the SCV marker color (A) and then

use the hose key chart (B) to connect to the

correct SCV outlet. (See

SCV Identification

Chart

)

Make sure the quick couplers are fully

engaged. If the quick couplers do not fully

engage, check to see that the couplers are

the same size and type.

Содержание 973PT


















































































Результаты поиска

Содержание 973PT

Отзывы:

Похожие инструкции для 973PT

Бренды по названию

Популярные бренды

FAST AG Solutions 973PT, Руководство пользователя

Результаты поиска

Содержание 973PT

Отзывы:

Похожие инструкции для 973PT

Бренды по названию

Популярные бренды