Make sure all fittings are tight.
Secure any loose wire and harness with wire ties.
Check all electrical connections.
Secure fuse block and relay in a weatherproof locat on.
a. Connect male end of harness to the heating element. Route the wire harness to
the battery. Use wire ties to secure harness.
b. Route the single red wire coming off the relay through a grommet in the fire
wall.
e. Using the ring terminals, connect the red wire to the positive of the battery.
Connect the green wire to a clean ground. Secure relay in an upright position,
preferably on the firewall out of the weather. Properly secure all electrical
leads and harness.
d.
Crimp the red wire to the flag terminal. Connect to the “hot side” of a terminal
using the fuse tap.
Note: Connect the fuse tap to the hot leg of the fuse.
c.
Choose a fuse that is on in the “Accessory” position. Pull fuse and attach fuse
tap to the “hot” leg. The Flag Terminal will fit over the blade of the fuse tap.
